2022 High quality Plastic Board Extruder - Corrugated Pipe Production Line – Cuishi
2022 High quality Plastic Board Extruder - Corrugated Pipe Production Line – Cuishi Detail:
plastic single wall corrugated pipe machine
1. plastic single wall corrugated pipe machine can produce PP PE PA PVC EAV corrugated pipe which is widely used as wire harness protective pipe for car and machine tool
2. equip with vacuum pump, the machine can produce washing machine pipe, air conditioner pipe, hookah pipe, wash basin drain pipe,medical pipe
3.mold transmission by gear
4. water cooling, wind cooling
5. car threading pipe / smocking pipe /shisha pipe/ air conditioner pipe/ washing machine pipe/drainage pipe
Equipment List
NO. |
Description |
QTY |
Unit |
remarks |
1 |
SJ-75/30 Single Screw Extruder |
1 |
set |
30kw motor |
2 |
Die Head Mold |
1 |
set |
chrome inside |
3 |
core bar and mouth mold |
1 |
set |
for each size nose |
4 |
Forming Mould (60pairs) |
1 |
set |
40cr, Nitriding |
5 |
Pipe Forming Machine |
1 |
set |
air&water cooling |
6 |
Pipe cutter machine |
1 |
set |
Round Flat HDPE/PVC Plastic Bridge Prestressed Post Tensioning Corrugated Pipe machine extrusion line for Concrete
HDPE Carbon corrugated Pipe Production Line Project
(Pipe dia OD32-Φ200 200mm)
1.1 variable frequency motor 30KW 1 set
1.2 motor drive (Huichuan) 30KW 1 set
1.3 specific requirements:
Due to the adoption of newly designed and optimized screw and sleeve, the extruder has the following advantages: high plasticization rate, uniform melt and continuous and stable production. High performance gearbox reducer. High torque, long service life and low noise.
1) Model SJ-75/30
2) Screw (Zhoushan)
- diameter 75mm – length diameter ratio 30:1
- material 38CrMoAlA – surface treatment Nitriding, polishing
- speed 1-75r/min
3) Barrel (Zhoushan)- material 38CrMoAlA
- internal surface treatment Nitriding, diffractive grinding
- heating method Ceramic heating ring
- heating power 22kw
- cooling system Barrel fan cooling
- cooling power 0.18kw × three
4) Reducer (Guomao)
- box material HT200 - gear form Helical gear
- gear material 20CrMnTi
- gear surface heat treatment and tooth surface quenching
- cooling mode Internal circulating water cooling
5) Drive motor (Qufu Jinsheng)
- mode Variable frequency motor – power 30KW
- variable frequency controller Drive (Huichuan)
6) Control appliance – contactor Siemens
- temperature control instrument Delta
The type diameter is 50-160mm, the material is 40Cr tube embryo die, equipped with stainless steel heater, which has the advantages of fast and uniform extrusion speed, low head pressure and so on.
- extrusion die specification: 55mm*22 with wall thickness 2.5mm , with moulds block 70 pairs
high speed mold for corrugated pipe machine
material: 40 cr with nitrating
mold quantity: 70 pairs
cavity: double size on same mold
5m/min Forming machine and mold for 55mm with wall thickness 2.5mm
The production speed can adjust with wall thickness and shape
Sbg-160 high efficiency bellows forming machine
- motor power: 4kw (Guomao)
- frequency converter: 3.7KW (Huichuan frequency converter)
- vacuum pump power: 7.5kw
- transmission mode: rack type.
- forward and backward movement: 500 mm.
- up and down movement: 150 mm.
- Fan Power: 180W (2 sets)
- cooling mode of forming machine: water cooling / air cooling
–Oil pump: 1
Qg-160 non cutting machine
- mode Non chipping cutting
- maximum cutting range Ф 50- Ф160
Product detail pictures:
Related Product Guide:
We usually continually offer you the most conscientious consumer services, along with the widest variety of designs and styles with finest materials. These initiatives include the availability of customized designs with speed and dispatch for 2022 High quality Plastic Board Extruder - Corrugated Pipe Production Line – Cuishi , The product will supply to all over the world, such as: Gambia, Kenya, Los Angeles, Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Lindsay from Stuttgart - 2017.02.28 14:19
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Hedy from United States - 2018.06.09 12:42