Manufacturer for Pvc Pipe Extrusion Line - PVC pipe production line 110-400mm – Cuishi

DESCRIPTION OF GOODS:

3.Drain pipe mould

4.Drain pipe mould

The following is the Auxiliary machinery

PVC pipe production line 110mm-400mm

Detail Technical Parameters of Each Above machines

1. screw loader feeder

2. Conical twin screw Extruder SJSZ80/156

1.1 servo motor 52KW 1 set

1.2. Servo motor variable frequency drive (innovince ) 52KW 1 set

1) Screw and barrel  (demaji)

texture of material 38CrMoAlA

Internal surface treatment Nitriding, diffractive grinding

Heating mode Cast aluminum heating ring

heating power 30kw   Cooling system Barrel fan cooling  Cooling power 250w × four  

3) Reducer (European Code)

- box material HT200  – gear form Helical gear

- gear material 20CrMnTi   – gear surface heat treatment Tooth surface quenching

- cold mode Internal circulating water cooling

4) Motor drive  

- mode servo motor   – power 52KW   – motor controller frequency control

5) Control appliance – contactor Siemens  

3. Mould for PVC pipe  two sets

Item	Description	Remarks
﹡ special designed pre-cooling parts can make sure smooth and shiny pipe surface
1	OD	110,  160, 200, 250, 315,355,400mm
2	Material of the mould body	Steel 45#(superior mold steel) harden treated
3	Material of the inner parts in mould	40Cr(superior mold steel) harden treated
4	Material of calibrator	Stannum Bronze
5	Pressure rating(or pipe wall thickness)	According to the file you sent

4,Vacuum Calibration and cooling Tank

5. Water spray cooling tank

6. Four pedrails haul off machine

Item	Description
Function: Draw PVC pipe forward stably, the speed is synchronized with extruder speed.
1	The quantity of Pedrail		Four
2	Pedrail width		80mm
3	Pedrail available Length		2200mm
4	Max. Hauling Force		30KN
5	Pedrail Clamping and releasing control		Pneumatically control
6	Hauling Motor Power		5.5kw
7	Hauling Speed		3m/min(max)
9	Speed Adjusting Mode		Variable frequency conversion（ABB/DELTA ）
10	Axis Height		1050mm±50mm

7. Automatic planetary cutting machine

Item	Description	Unit	Remarks
﹡PLC control、automatic meter counting cutting, Planetary cutting  ﹡Pneumatic clamping and releasing, Pneumatic cutting return  ﹡Saw blade adopts carbide blade ﹡With dust colleting device
1	Cutting type	mm	Automatic cutting
2	Cutting diameter suitable range	mm	110-400MM
3	Cutting motor power	Kw	2.2
4	Revolution motor Power	Kw	1.5
5	Fan motor power	Kw	1.5
6	Material of Cutting Saw		Alloy steel
7	Clamping Mode		Pneumatically
8	Cutting Control		PLC control
9	Element of Electric System	mm	Schneider
10	Valve of Pneumatic system		From AIR TAC

9.  Stacker for finished pipe

No.3   PVC pipe belling/socketing machine110mm-400mm

600 PVC pulvertizer     www.cuishimachine.com   www.cuishiextruder.com

First, the use       

Our factory absorbs advanced technology to develop a series of mills for low to medium hardness plastics, especially for the processing of milling column thermoplastic PVC/PE plastic recycling grinding. The practice of the plastic products professional factory proves that the grinding powder is processed 20%-30% in the father-in-law return visit, and the chemical and physical properties of the products remain unchanged. Therefore, it is the best equipment for plastic products factories to reduce costs and reduce costs to solve the accumulation of waste products.

The low temperature is the main advantage of the machine

1、 According to the heat work equivalent: after doing work per hour into 860 kcal heat, this machine is external exhaust, the air volume is large, by the import and export of the wind temperature difference on behalf of most of the heat, a small part of the heat is solved by water cooling. Requirements: The inlet temperature of the cooling water is not more than 25, the outlet water temperature is not more than 50, and the cooling water flow is appropriately increased in summer to reduce the temperature。

2、 Third, the main technical parameters

3、  Number of cutterheads: 1 piece, outer diameter 600mm

4、  tooth plate: 1 pay (high-quality steel carburizing quenching, hardness hr60)

5、 Blade: 30 pieces (high-quality steel carburizing and quenching, hardness hr60)

6、  Spindle speed; 3000r/min

7、 Motor power: 55kw

8、 Induced draft fan model: YI32S1 power: 7.5kw

9、 Shutdown fan power: 0.75kw

10、 vibrating screen motor power: 0.25kw

11、 Output: pvc20-80 mesh output 150-360kg/h

12、 Weight: 1200kg

SWP630 PVC Pipe Crusher

- Feeding size: 520mm x 450mm

- Mobile cutting rotation diameter: 630mm

- Pellet output: 700-800 Kg/hr

- Motor: 37KW – 380RPM

- Motor brand: Siemens Bader

  Electric cabinet system: The main accessories are Siemens or Schneider

- Steel plate thickness of feed nozzle: 25mm

- Thickness of steel plate of crusher body: 40mm

- Number of moving knives: 6 pieces

- Number of fixed knives: 4 pieces

– -Air delivery system:

+ Motor: 4Kw – Brand Red Flag

+ Volume of stainless steel air hopper: 100 cubic meters (liters)